CS Soaker Hose Pressureless
Soaker Hose Irrigation Without Mains Water Pressure
The CS Pressureless Soaker Hose is designed for irrigation using a rain barrel, rainwater tank, or cistern. It releases water slowly and evenly directly to the plant root zone.
CS Pressureless Soaker Hose for Rainwater and Low Water Pressure
The CS Pressureless Soaker Hose provides reliable irrigation even when mains water pressure is not available. It is ideally suited for use with rainwater tanks, rain barrels, and cisterns. Water is released through fine pores, allowing it to seep slowly into the soil and deliver moisture directly to the root zone.
Benefits
Benefits of the CS soaker hose pressureless
Pressureless irrigation is an ideal solution when using rainwater and when plants need slow, quiet, and ground level watering.
Water Efficient Irrigation
Water is delivered directly to the plant root zone. This helps reduce water loss caused by surface spraying or unnecessary irrigation of uncovered areas.
Works without water pressure.
The hose is designed for low pressure applications and is suitable for rainwater from a tank, barrel, or cistern.
Easy installation
Installation is straightforward. The hose is laid along the plants and connected using the appropriate fittings.
Versatile use
Reliably waters vegetable beds, raised beds, planting areas, pots, and containers.
Robust and durable
Made from recycled tire granulate and polyethylene for long service life.
Quiet and energy efficient
No pump is required for many applications. As a result, the system operates quietly and does not require an additional power source.
How It Works
How the CS soaker hose pressureless works
The hose releases water evenly and close to the ground. When used with an elevated rainwater tank, it creates a simple irrigation system that can supply plants with water slowly and continuously.
- Connection to the water source: Connect the hose to a water tank, rain barrel, or cistern.
- Use clean water: Filtered water helps reduce dirt particles and protects the pores.
- Lay the hose on a level surface: Laying the hose as straight and level as possible helps ensure even water distribution.
- Adjust the watering duration: Start with approximately fifteen to thirty minutes, then check the soil moisture.
Practical Tip
Place the water reservoir higher than the area to be irrigated whenever possible. Avoid steep inclines along the hose route to maintain a more even water flow.
Technical data
Technical data at a glance
The following specifications will help you plan, select, and install the CS Pressureless Soaker Hose.
| Feature | Value |
|---|---|
| Material | Recycled tire granulate and polyethylene |
| Diameter | 13 mm (1/2 inch) inner diameter |
| Lengths | 7,5 m, 10 m, 15 m, 20 m, 25 m, 30 m, 50 m, 75 m und 100 m |
| Maximum installation length | Up to 25 m per irrigation line when installed in a straight layout. |
| Water delivery | Approximately 8 to 10 liters per meter per hour. |
| Max. Operating Pressure | 1.5 bar |
| Recommended Operating Pressure | 0 - 0.5 bar |
| Frost Resistance | Can remain buried during winter. Store accessories in a frost free location. |
| Connection | Standard 1/2 inch click system |
Applications
Typical Applications
The CS Pressureless Soaker Hose is particularly suitable when using water from a storage tank.
Vegetable Beds
Even, ground level irrigation along plant rows.
Raised Beds
Flexible installation and targeted watering of smaller planting areas.
Pots and Containers
Consistent soil moisture with proper installation and suitable watering duration.
Greenhouses
Quiet irrigation without a pump and with ground level water distribution.
Tips for optimal use
With proper planning, a suitable water source, and correct installation, the CS Pressureless Soaker Hose provides reliable irrigation.
Underground or Beneath Mulch
Installing the hose below the surface or under mulch can reduce evaporation and improve irrigation efficiency.
Raise the Water Source
Positioning the water tank at a higher elevation improves water flow and supports operation without mains water pressure.
Store Accessories in a Frost Free Location
Irrigation controllers, water filters, and distributors should be stored in a frost free location during winter.
FAQ
Frequently Asked Questions About the CS Pressureless Soaker Hose
Answers to common questions about watering duration, installation, and use in the garden or greenhouse.
How long should the CS Pressureless Soaker Hose run each day?
That depends on the plants, soil, and weather. As a starting point, fifteen to thirty minutes per day is suitable. Check soil moisture and adjust the runtime accordingly.
Can I shorten or extend the hose?
Yes. The hose can be cut to the desired length and extended using compatible connectors. Be sure to follow the recommended maximum installation length for each irrigation line.
Is the hose suitable for greenhouses?
Yes. The even, ground-level water delivery without a pump is very reliable in greenhouses.
Do I need a water filter?
A water filter is especially recommended when using rainwater or water from storage tanks, as dirt particles can clog the pores of the hose.
Configure Pressureless
Configure Your CS Pressureless Soaker Hose System
Configure your pressureless irrigation system to match your garden area, water source, and required hose length.